电动调节阀行业标准汇总

   





电动控制阀标准编号               
    GB/T4213-1992        气动调节阀    Pneumatic industrial process control valves
    GB10869-1989         电站调节阀技术条件  Specification of control valves for fossil power stations
    JB/T7228-1994        风量调节阀
    JB/T57182-1994       气动调节阀产品质量分等
    JB/T57218-1994(2005复审)  气动调节阀可靠性要求与考核方法
    HG/T3237-1989        橡胶机械用自力式压力调节阀
    NF C46-503-1999      工业过程调节阀。第2-1部分-流量。在安装条件下液体流量的截面方程 (Industrial-process control valves. Part 2-1 : flowcapacity. Sizing equations for fluid flow under installed conditions.)
    NF C46-502-1993      工业过程用电动控制阀。第1部分-术语和概论 (Industrial-process control valves. Part 1 : control valve terminology and generalconsiderations.)
    NF C46-506-1990      工业过程用调节阀。流量。流量的特性和校正的固有系数(Industrial-process control valves. Flow capacity. Inherent flowcharacteristics and rangeability.)
    NF C46-525-1991      工业过程用调节阀,调节阀门的限定栅屏 (Industrial-process control valves. Control valve data sheet.)
    NF M62-301-4-2001    密封罩用组件。第4部分-通风和气体清洁系统(如-过滤器和疏水阀)的安全和调节阀门以及控制和保护装置 (Components forcontainment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.)
    ANSI/UL 144-2001     液化石油气压力调节阀的安全标准 (Standard for Safety for Pressure-Regulating Valves for LP Gas)
    EN ISO 5135-1998     声学在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)
    EN 88/prA2-2001      入口压力200毫巴以下的燃气器具的压力调节阀修改A2 Pressure governors for gas appliances for inlet pressures up to 200 mbar; Amendment prA2
    prEN 14129-2001      液化石油汽(LGP)   罐压力调节阀 Pressure relief valves for LPG tanks
    EN 88-1991+A1-1996   入口压力200毫巴以下的燃气器具的压力调节阀 Pressure governors for gas appliances for inlet pressures up to 200 mbar
    DIN V 19259-2-1999   设备文献。调节阀用带分类示意图的数据类型 (Documentation of devices - Standard data element types with associated classification for valves)
    DIN EN 60534-6-1-1998工业流程控制阀。第6部分-调节阀门驱动的位置调节器固定用安装细节。第1节-行程驱动上位置调节器的安装 (Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997)
    DIN 3163-1974        公称压力25的冷却剂循环直通调节阀 (Control through valves for refrigerant circuits, nominal pressure 25 bar)
    DIN 32730-1993       取暖装置中水和蒸气用具有安全功能的调节阀。
    UL 144-1999          液化石油气电动控制阀 (LP-gas regulators )
    UL 17-1994           燃油设备用通风孔或烟囱连接器调节阀门 (Vent or chimney connector dampers for oil-fired appliances )
    JIS B8387-2000       液压动力。四孔调节阀门和四孔方向控制阀门。02,03,05尺寸。夹持尺寸

 如果您喜欢我们的资讯和栏目,

关注我们的微信及微博公众平台,

我们会在每周三推送实用的

调节阀和执行机构行业技术资讯。

格莱特控制阀感谢大家收看!

让您的自动化更强大!